This means every device on your network, and every interface on every device is automatically analyzed for performance, errors, QoS, and configuration.
TotalView collects and analyzes 19 error counters on every interface. This means we know when, where, and why packets are lost, buffered, or mis-handled anywhere in the environment.
You’re responsible for the entire infrastructure — you should have visibility to match.
Total Network Visibility®
Want to find out what happened between two IP endpoints at a certain time?
Our industry-leading path mapper will tell you what happened on all involved links, switches, and routers used to pass traffic between any two IP addresses at any point in time. This means you can solve problems that happened 5 minutes ago, 5 hours ago, or 5 days ago from one easy-to-disseminate report.
You never have to tell a user “I don’t know what happened”.
With a single picture, you can see how your network is connected. The diagram is automatically generated so you don’t have to worry about updating it.
It’s flexible and interactive so you can move elements around and lock them in place so you can have a static or dynamic view of the environment.
The days of manually updating network diagrams is over
Automatic Interactive Network Diagram
Troubleshooting SD‐WAN connections can be difficult due to the SD‐WAN controllers not showing the complete picture of what is happening on each individual link and path. Our SD‐WAN monitoring can help shed light on what’s happening with each link and show the full route tree that connects to each
endpoint as well as what occurred along that path.
Configurable alerts permit knowing about problems with latency, loss, outages, and route changes.
Want to know what happened 20 minutes ago in the New York network?
Our built‐in correlation engine can quickly narrow down and tell you all the events that occurred in that location at that time. Interfaces or devices that changed status, as well as packet loss or utilization spikes that occurred.
Troubleshooting mysterious gremlins has never been easier.
Built‐in Correlation Engine
If you can rapidly identify who is using your bandwidth and what they are doing, you can make sure that business critical resources are used appropriately.
Our NetFlow capability permits an unlimited number of interfaces to be added to monitoring. This means you never lose visibility due to a license limitation.
Mysterious network slowdowns won’t go un‐diagnosed.
Knowing that your cloud services are working well is important for next-generation monitoring.
If you don’t know what’s causing problems, you’re working in the dark.
We can alert on the overall performance to cloud services as well as disclose the route tree used to reach the services so root-causes of performance problems can be easily identified.
Knowing where the problem is happening leads to faster resolution.
Cloud Service Monitoring
TotalView automatically generates an inventory of all network devices. Including:
• Model number
• Serial number
• OS firmware version
• OS software, version
• Hardware manufacture date
• Internal description
Full Inventory of Network Devices
Keeping a close eye on critical WAN interfaces is important. Having a single report that shows you what’s happening regarding your WAN links, what they are costing you, and who to call when problems occur can result in faster responses to problems and reduced operational costs.
Awareness is more than half the battle.
WAN Health Report
Digging through your network to try to find where something is connected shouldn’t be a chore. With just one view, you can see what’s connected to switch ports including CDP/LLDP information, MAC addresses, manufacturers, IP address, and DNS entries.
It’s equally easy to search for a device and instantly discover where it’s connected to the network.
Never trace a cable again.
Everything you need to run a perfectly healthy VoIP environment, including:
• Phone locator
• SIP Trunk monitoring
• License-unlimited call simulator agent
• Phone move alerting
• Full visibility into QoS queues with QueueVision™
Never have a poor quality call again.
Complete VoIP Visibility
TotalView has a deep understanding of network health no matter what modern or legacy equipment powers your network.
As long as SNMP is supported, we can automatically dig into the device and tell you what it knows.
Don’t be satisfied with last-decade’s monitoring solution that takes 5-10 seconds to see a page build.
TotalView uses a fully RESTful JSON API and in-memory database capabilities to provide lightning-fast web browsing.
This means you can quickly find and resolve problems and aren’t stuck slogging through pages that take multiple seconds to build.
Quick responses = quick resolutions.
Highly Responsive User Interface
TotalView can automatically reconfigure itself in response to changes in your network. Adding new devices takes just a few minutes with the QuickConfig Wizard, and they all are automatically covered under your global alerts.
Less configuration effort and more automation means that your team spends more time proactively fixing network problems. It also has less chance of lost visibility due to misconfigurations or forgotten settings.
Spend your time improving the network, not configuring the solution.
Rapid Configuration & Reconfiguration
A single shared or virtual machine can monitor networks as large as 100,000 interfaces*. Any version of Windows (server OS or desktop OS), 4GB of RAM, and 20GB of storage space are all we need.
• We don’t need a webserver.
• We don’t need a separate database.
• We don’t need .NET.
• We don’t need Java.
Such a light footprint system takes less support and monitoring – it just works.
* Over 200,000 interfaces supported with a single physical server.
Highly Scalable Lightweight Footprint
Additional included capabilities:
• Full alerting capability via email/syslog
• Built‐in TFTP server
• Fully‐integrated Syslog server
• Reporting Engine for custom reports
• Natural Language Troubleshooting
• Spanning-Tree Monitoring
• Full CDP/LLDP associations