SwitchMonitor 67.147.157.225 Int#1 Details

• Demark-Router 67.147.157.225 Telnet SSH Web Syslog • • • • • • • • 2 2 0 0 Santa Clara, CA NOC x4468 9,225k 9,208k 3k 8k 0.041% 0.093% 0.044% 0.164% JAD0427073Z (3591365050) c2620 29,360,128 Device 12/31/2007 KR07-8718-12-7301 888-555-1321 SNMPV2C 100.00% 85 days 08:18:48.19

Interface Summary << >>

Interface Number		IP Address	Description	H	Peak Daily Error Rate	Peak Daily Utilization		Interface Speed	Duplex*	Status		% Broadcasts
Interface Number		IP Address	Description	H	Peak Daily Error Rate	Tx	Rx	Interface Speed	Duplex*	Admin	Oper	Tx	Rx
•	`Int #1`	67.147.157.2	Se0/0: Serial0/0 (T1 to Focal)	•	`0.056%`	`46.443%`	`98.267%`	`1,536,000`	`-`	`up`	`up`	`0.000%`	`0.184%`

Interface Utilization

Current Utilization

Download Excel

View Advanced Stats

Hide Advanced Stats

	Tx	Rx
Min	`0 kbps`	`0 kbps`
Avg	`56 kbps`	`195 kbps`
Max	`830 kbps`	`1,520 kbps`

Peak packets per second

Peak broadcasts per second

Packet Loss (Errors per polling period)

Interface Details

MAC Address	MTU	Type	Last Changed	Poll Type
MAC Address	MTU	Type	Last Changed	MIB-II
	`1500`	`propPointToPointSerial`	`74 days 15:29:33.90`	`FAST64POLL`

Interface Traffic

	Packets		Broadcasts		% Broadcasts
	Tx	Rx	Tx	Rx	Tx	Rx
Historical	`366,446,300`	`399,589,248`	`0`	`735,277`	`0.000%`	`0.184%`
Last Poll	`8,620`	`8,791`	`0`	`30`	`0.000%`	`0.340%`

Interface Errors

Error Counter	Type	Errors		Errors per Packet
Error Counter	Type	Current	Total	Current	Average
Inbound Unknown Protocols	`Common`	`0`	`0`	`-`	`-`
Inbound Discards	`Rare`	`0`	`0`	`-`	`-`
Inbound Errors	`Rare`	`0`	`56,738`	`-`	`0.007%`
Outbound Discards	`Rare`	`0`	`6,719`	`-`	`0.001%`
Outbound Errors	`Common`	`0`	`0`	`-`	`-`
Outbound Queue Length	`Reference`	`0`	`0`	`-`	`-`
Error Totals		`0`	`63,457`	`0.000%`	`0.008%`

Network Prescription™

Reception Utilization Rate is High
This interface is receiving a lot of data. If the reception rate is abnormal, then a packet analyzer should be deployed to interrogate the abnormal traffic. If the reception rate is expected, then consideration should be given to increasing the bandwidth of this link.
Inbound Errors exist on this interface
Inbound errors are packets that are mal-formed, but are enclosed in a valid frame. This can be caused by a bad NIC driver or protocol driver on the sending device. To track down this error, you will need to connect a packet analyzer in front of this interface to capture the actual mal-formed packet to determine which device is at fault.
Outbound Discards exist on this interface
Packets were discarded because the transmitting machine may have run out of outbound packet buffers. This can occur if there is not enough outbound bandwidth available to transmit all requested data. It is suggested that you increase the bandwidth of this link, or increase the number of transmit buffers on this device,

Interface Notes

Add Note

Date/Time	Username	Note
2/12/2006 2:50:37 PM	SLAWRENCE	Provider changed smartjack
3/22/2006 7:51:02 PM	TTITUS	Changed cross-connect feeder to pair 12
4/18/2006 6:51:02 PM	TTITUS	Replaced CAT5 cabling