| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| • |
Int #7 |
|
swx 0/3: swx 0/3: Fast Ethernet (BCM53xx) |
15.632% |
0.001% |
0.004% |
100,000,000 |
Half |
none |
up |
up |
22.456% |
94.358% |
11.111% |
88.298% |
0.001% |
0.002% |
• |
|
00a0c8327b3c |
1518 |
ethernetCsmacd |
71 days 16:21:42.68 |
Disabled |
V2POLL64 |
FastEther |
VLAN #0: 00-00-0C-07-AC-01 (10.100.36.2)
VLAN #0: 00-00-0C-07-AC-02 (10.100.36.3)
VLAN #0: 00-0A-41-5E-AE-A1 (10.100.36.1)
VLAN #0: 00-10-49-00-4A-68 (10.100.36.100)
VLAN #0: 00-10-C6-CE-70-EA (10.100.36.152)
VLAN #0: 00-10-C6-CE-7C-B1 (10.100.36.155)
VLAN #0: 00-13-CE-6D-D6-60 (10.100.36.156)
VLAN #0: 00-1A-A0-04-FC-D6 (10.100.36.11)
VLAN #0: 00-50-73-67-32-75 (10.100.36.60)
VLAN #0: 00-60-47-4F-63-54 (192.168.202.1)
VLAN #0: 00-90-27-6D-35-AA (10.100.36.10)
VLAN #0: 00-B0-64-61-C4-58
VLAN #0: 00-D0-58-A3-58-D1 (192.168.202.2)
VLAN #0: 78-2B-CB-B6-D7-CB (10.100.36.16)
VLAN #0: 78-2B-CB-B6-D7-D6 (10.100.36.161)
VLAN #0: AC-D1-80-00-63-C6 (10.100.36.160)
Less...
More...
|
| |
|
 |
 |
 |
|
|
Tx |
Rx |
| Min |
0 kbps |
1 kbps |
| Avg |
0 kbps |
1 kbps |
| Max |
1 kbps |
3 kbps |
| 95th |
1 kbps |
2 kbps |
| 95th % |
0.001% |
0.002% |
|
|
|
|
|
Interface Traffic
|
|
902,834 |
880,510 |
261,455 |
14,726,394 |
22.456% |
94.358% |
80 |
77 |
10 |
581 |
11.111% |
88.298% |
Interface Errors
| • |
Common |
0 |
0 |
- |
- |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Common |
0 |
90 |
- |
0.001% |
| • |
Reference |
0 |
0 |
- |
- |
| • |
Common |
0 |
18 |
- |
0.000% |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Common |
0 |
29 |
- |
0.000% |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Rare |
0 |
90 |
- |
0.001% |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Rare |
0 |
0 |
- |
- |
| • |
Rare |
0 |
0 |
- |
- |
0 |
227 |
0.000% |
0.001% |
- Interface configured for half-duplex operation
This interface should be configured for full-duplex operation to prevent collisions from occurring and error rates rising.
- Late Collisions exist on this interface
This condition can occur with Ethernet switches that are configured for low-latency forwarding (like Fast-Forwarding or Fragment-Free forwarding) when multiple switches are daisy-chained together. If multiple switches are daisy-chained together, it is recommended that switches be configured for the "store-and-forward" method of forwarding to remedy this error.
- Collisions exist on this interface
This can be eliminated by configuring the interface and device to work in full-duplex mode. This may not be possible if more than one device is connected to this interface. If this interface is plugged into a single device, then full-duplex may be enabled (providing the network card can recognize full duplex). If this interface has a hub plugged in, then full-duplex operation cannot be enabled.
|
|
|
|